本文二维码信息
二维码(扫一下试试看!)
活性炭吸附结合TiO2光催化分离纯化杨木预水解液中的木糖
Purification of Xylose in Poplar Prehydrolyzate by Activated Carbon Absorption Combined with TiO2 Photocatalysis
收稿日期:2019-06-28  
DOI:10.11980/j.issn.0254-508X.2019.11.003
关键词:  杨木  预水解液  活性炭  TiO2光催化  木素脱除
Key Words:poplar  prehydrolyzed liquid  activated carbon  TiO2 photocatalysis  lignin removal
基金项目:国家重点研发计划资助项目 2017YFB0307900 ; 国家自然科学基金资助项目 31670595 31770628 ; 泰山学者工程 国家重点研发计划资助项目(2017YFB0307900);国家自然科学基金资助项目(31670595,31770628);泰山学者工程。
作者单位
高其超 齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室
制浆造纸科学与技术教育部重点实验室山东济南250353 
杨桂花 齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室
制浆造纸科学与技术教育部重点实验室山东济南250353 
姜在勇 齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室
制浆造纸科学与技术教育部重点实验室山东济南250353 
吉兴香 齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室
制浆造纸科学与技术教育部重点实验室山东济南250353 
颜家强 齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室
制浆造纸科学与技术教育部重点实验室山东济南250353 
陈嘉川 齐鲁工业大学(山东省科学院)生物基材料与绿色造纸国家重点实验室
制浆造纸科学与技术教育部重点实验室山东济南250353 
摘要点击次数: 3884
全文下载次数: 2427
摘要:利用活性炭吸附和TiO2光催化降解脱除杨木预水解液中的溶解木素,探讨了不同活性炭类型(木质基磷酸活化活性炭、食品质303活性炭、煤质活性炭)、活性炭用量、吸附时间、光催化时间、TiO2用量对预水解液中木素、总木糖、糠醛、羟甲基糠醛(5-HMF)以及乙酸等有机组分含量的影响,优化确定了活性炭吸附和TiO2光催化降解条件。研究结果表明,木质基磷酸活化活性炭对木素的吸附脱除效果最好,在活性炭用量为1.0%和吸附时间为10 min时,总木糖得率为93.1%,木素、糠醛、5-HMF、乙酸脱除率分别为75.1%、29.3%、22.4%、3.5%。单一TiO2光催化处理,在TiO2用量1.0%和光催化时间10 h条件下,总木糖得率为89.0%,木素、糠醛、5-HMF、乙酸脱除率分别为40.2%、24.2%、32.1%、3.1%。活性炭协同TiO2光催化处理预水解液的较优工艺条件为:木质基磷酸活化活性炭用量1.0%、光催化时间6 h和TiO2用量0.1%~0.5%,此条件下预水解液中木素的脱除率为84.4%~86.7%,总木糖得率为88.2%~89.8%,糠醛脱除率为53.8%~65.1%,5-HMF脱除率为48.6%~51.7%,乙酸含量变化不明显 。
Abstract:Activated carbon adsorption and TiO2 photocatalytic degradation were used for removing lignin from poplar prehydrolyzate. Effect of activated carbon types (wood-based phosphoric acid activated carbon, food quality 303 activated carbon, coal-based activated carbon), activated carbon dosage, adsorption time, photocatalytic time, TiO2 dosage on the contents of lignin, total xylose yield, furfural, hydroxymethylfurfural(5-HMF) and acetic acid of prehydrolysis liquid were investgated. The conditions of activated carbon adsorption and TiO2 photocatalytic degradation were optimized. The results showed that the adsorption effect of wood-based phosphoric acid activated carbon on lignin removal was the best. Total xylose yield of 93.1%, the lignin, furfural, 5-HMF, and acetic acid removal rates of 75.1%, 29.3%, 22.4%, and 3.5% respectively, were obtained when activated carbon dosage was 1.0% and adsorption time was 10 min. For single TiO2 photocatalytic degradation treatment, the total xylose yield of 89.0%, the lignin, furfural, 5-HMF, and acetic acid removal rates of 40.2%, 24.2%, 32.1%, and 3.1% , respectively were achieved when TiO2 dosage was 1.0% and photocatalytic time was 10 h. The optimal treatment conditions of combining activated carbon adsorption and TiO2 photocatalysis of prehydrolyzed liquid were dosage 1.0% of wood-based phosphoric activated carbon, photocatalytic time for 6 h and TiO2 dosage of 0.1%~0.5%, in which 84.4%~86.7% of lignin removal, 88.2%~89.8% of total xylose yield, 53.8%~65.1% of furfural removal, 48.6%~51.7% of 5-HMF removal were obtained, and acetic acid content was not obviously changed.
查看全文  HTML  查看/发表评论  下载PDF阅读器